.png)
Paint Correction
Over time, your car's paint takes a beating. Automatic car washes, improper wiping, and everyday road grit leave behind thousands of micro-scratches, swirl marks, and a dull "haze." When the sun hits your car, these scratches scatter the light, making your paint look faded and old.
Paint Correction is the meticulous process of permanently removing these surface imperfections. By leveling out the clear coat using professional machine polishers, heavy compounds, and fine polishes, we restore the paint to a completely flat surface.
The result? Light reflects perfectly off your vehicle, creating that jaw-dropping, flawless mirror finish.
Stage 1: Paint Correction (The Polish)
-
Best For: Newer cars, well-maintained vehicles, or light colors with minor swirling.
-
The Process: We use a medium-cutting foam pad and a finishing polish.
-
The Result: This removes about light swirl marks and dramatically boosts gloss and clarity in a single pass.
2-Stage Paint Correction (The Compound & Polish)
-
Best For: Vehicles with moderate scratches, heavy swirl marks, and noticeable oxidation (dullness from the sun).
-
The Process:
-
Step 1 (The Compound): We use a heavy-cutting compound and a microfiber or wool pad to actively "cut" through the deeper scratches and defects. This leaves the paint flat but slightly hazy.
-
Step 2 (The Polish): We follow up with a fine polishing pad and finishing polish to refine the paint, remove the haze, and pull out that deep, crystal-clear shine.
-
-
The Result: Removes paint defects. This is the sweet spot for most older or daily-driven vehicles to get that true transformation.
3-Stage Paint Correction (The Showroom Restoration)
-
Best For: Darker colors (especially black cars), collector vehicles, or severely neglected paint with deep scratches.
-
The Process: This is an elite, multi-day service. We start with heavy wet-sanding or an ultra-heavy compounding stage to level out deep defects. Next, we do an intensive secondary compounding/polishing stage to remove the heavy sanding marks. Finally, we jewel the paint with an ultra-fine finishing polish.
-
The Result: Removes imperfections, leaving a flawless, absolutely perfect mirror finish with zero distortion.
Pro Tip: Once your paint is corrected to a mirror finish, the clear coat is completely bare. This is the absolute best time to lock in that perfection with a System X Ceramic Coating to seal the shine and protect it from scratching up again!
